If I am not mistaken, the buttons are triggered by a positive valuechange, (after a negative valuecange), while the faders (as of version 5.727) requires a DMX-in value that matches the faderposition. If your Remote DMX Desk dit not send exactly zero value in the lower fader position, you would not gain control of the faders, as you would never reach the grabposition try examine the DMX-valby glad - grandMA1 Discussion forum
try this syntax OFF PAGE x THRU y - PAGE (ENTER) to turn off other pages than the currentby glad - grandMA1 Discussion forum
Press "Setup", and check that you are not in "Wide Executor Mode"by glad - grandMA1 Discussion forum
maybe this is of some help?by glad - grandMA1 Discussion forum
1. Set your Executors in HTP-mode 2. Add a pre-cue (i.e Cue 0.5) with dimmer@zero for all fixture in each sequence 3. Add "Goto Cue 0.5" at the end of your macro/link - as your sequences are run in HTP, the automatically run pre-cue will not affect visual output, however your next sequence is activated, and fixtures with zero dimmer may MIB. Andreas Gladby glad - grandMA1 Discussion forum
When setting up the remotes, are you sure you have typed the correct special syntax for FADER-remote? (as described in the second line of red text in the configuration screen)by glad - grandMA1 Discussion forum
Reseting executors is probably neccesary for the Clone-operationto take place, however there should atleast be a warning about this... If memory serves me right, it is only executoroutput that gets destroyed, so a workaround is loading output into programmer (i.e. IFOUTPUT ENTER ENTER) to keep the static look while cloning.. Andreasby glad - grandMA1 Discussion forum
from the manual, page 173 -------- ON As starting keyword, every object that follows after the ON will be switched ON without changing the current step. ON (target object list) If fade or delay are given, they overwrite the pre-programmed times. Target type Operation EXEC Switch on executor EFFECT Switch on effect (fading in in last direction) PAGE Does On on all its executors. SPEEDMASTERby glad - grandMA1 Discussion forum
In your macro, rather than using "Enter Enter", add this syntax for activating: ON PRESET 1 THRU 9 Andreas Gladby glad - grandMA1 Discussion forum
most tablets has by default enabled "Press and Hold" (= rightclick) try to disable this function: 1. On the taskbar, tap the Start button, and then tap Control Panel. 2. Tap Printers and Other Hardware, and then tap Tablet and Pen Settings. 3. Tap the Pen Options tab. 4. Under Pen actions, in the Pen Action column, tap Press and hold. 5. tap Settings. 6. uncheck the Enable pressby glad - grandMA1 Discussion forum
the Standardversion of the grandMA (no expansion chip installed, or NSP connected) is licensed for 2048 parameters. If Universes are displayed in Red, these universes exceed the licensed parametercount, and calculation are disabled. - try unpatching fixtures from universe A-D, and calculation for E and F should be enabled. Andreas Gladby glad - grandMA1 Discussion forum
1.) 3xAlign has allways only worked on only half of the selection, if the initial value is 0% or 100%. Please check out 3.) I have experienced with earlier versions that the random-table sometimes resets the offset to 0 (rather than the default 0-360) - an Offset of 0 would appear as if grouping allways was at 1... Andreasby glad - grandMA1 Discussion forum
above a single fader, next to the executorbuttons, there is a button labeled "Set-Time/Man-fade". press this button twice (until both Red and Green LED is lit) Andreas Gladby glad - grandMA1 Discussion forum
Ma-net will be enabled when you start a sessionby glad - grandMA1 Discussion forum
try doing a second PAUSE on the speedmaster, this should do what you want (unpause)... Andreas Gladby glad - grandMA1 Discussion forum
The rate is available on the second encoder of the sequence playbackbar (not sequence edit-bar) Open the editor, then press esc, and you should have it on the second encoderby glad - grandMA1 Discussion forum
The Micro does not have enough horsepower to deal with multiple userprofiles, so I guess the bug is that you got the option to "add everything".... did you try to import with "Disk creator only" ?by glad - grandMA1 Discussion forum
the SmartWindow displays attributesvalues for a fixturetype. It does not display presets/palettes.by glad - grandMA1 Discussion forum
yes there are several fuvtions that the old AVAB desks did(do) a lot better than the grandMA and other more current desks. e.g. a true GO-. the grandMA performs a GO- as a GOTO , while it rather should have been a play backward to previous state. e.g. Cue 1 fade 3 sec Cue 2 fade 30 sec Cue 3 fade 2 sec Going back from cue 3 to cue 2 should use 2 seconds, not 30 seconds.... Individual timesby glad - grandMA1 Discussion forum
this might work: 1. put the chasers on a seperate page with both Master-fader and Fade-fader 2. link each chaser to a playbackmastergroup and assign playbackmasters to your actual page 4. use macros (FADER x.y AT....) to adjust the Fade Andreas Gladby glad - grandMA1 Discussion forum
to my understanding: Wish/Suggestion: Playbackmasters should default to 100% Bug: 1. Link Executor 21 to playbackmastergroup 1 2. Move/Copy Executor 21 at Executor 22 ---> Link to playbackmastergroup 1 is lost.by glad - grandMA1 Discussion forum
- you may assign a filter that will only match one specific world-name, however you cannot assign one specific world to a user. The World-filter is based on text-match (with or without wildcards):by glad - grandMA1 Discussion forum
I would guess that the 2port has problems with desks that does not sent all 512 channels, as this may result in a refreshrate far far beyond 44Hz while still following the specs.by glad - grandMA1 Discussion forum
this is a correct observation. as there may be multiple worlds (or no worlds) matching the filter, there may not be one specific world to automatically activateby glad - grandMA1 Discussion forum
- "i dont understand why nobody from ma doesnt help us in this thing!" - to my knowledge the BCF are not capable of sending the neccesary midicommands to remotely control a grandMA fader. as the BCF is a programmable multipurpose MIDI device, while the grandMA is merely a lighting desk with Midi trigger options, I would say that the problems is limitation within the Behringer anby glad - grandMA1 Discussion forum
not familiar with the bcf but these pages may be helpful:by glad - grandMA1 Discussion forum
Which firmware-version are the 2port running? please make sure to upgrade to v1.15 (included with desk version 5.761/5.821) - this version includes important bugfixes, aswell as improved DMX-in support -------------by glad - grandMA1 Discussion forum
1) for this special scenario, Invert does the same as IfActive, however the Invert Selection function is primary intended to switch between two different parts of a group: 2) to my knowledge they are exactly the same, both reads "All" in commandlineby glad - grandMA1 Discussion forum